:: HOME :: COMPANY PROFILE :: PRODUCT :: FEEDBACK :: CONTACT US

Operating Instructions

WARNING: Please read and understand the safety rules in the owner’s manuals before operating any power tool.
In addition to the safety guidelines described in the owner’s manuals, we would like to draw your attention to some dangers which may occur while working with pneumatic tools, to guarantee a maximum degree of safety in the work place.
Tork Air Tools Operating Instruction - 1 : If high noise levels occur, always use ear protection. Always use correct breathing protection. If dust appears while working, protective goggles should always be worn to protect eye from damage. If necessary, wear protective gloves for certain type of works.
If high noise levels occur, always use ear protection. Always use correct breathing protection. If dust appears while working, protective goggles should always be worn to protect eye from damage. If necessary, wear protective gloves for certain type of works.
Tork Air Tools Operating Instruction - 2 : Never use pneumatic tools in an explosive atmosphere. Never use pneumatic tools in an explosive atmosphere.
Tork Air Tools Operating Instruction - 3 : After use or before changing accessories always disconnect the tool from the air hose and release pressure. After use or before changing accessories always disconnect the tool from the air hose and release pressure.
Air hose under pressure may lash out when disconnected and could lead to injurries.
Tork Air Tools Operating Instruction - 4 : Before using a pneumatic tool, always check that all couplind, plugs and accessories are secure. Before using a pneumatic tool, always check that all couplind, plugs and accessories are secure.
Tork Air Tools Operating Instruction - 5 : Always keep a safe distance before yourself and all moving parts. Take care that jwellery, loose clothing, etc. Do not become entangled with any moving parts. Always keep a safe distance before yourself and all moving parts. Take care that jwellery, loose clothing, etc. Do not become entangled with any moving parts.
Tork Air Tools Operating Instruction - 6 : Never exceed the maximum pressures listed in the owner’s manuals, since that it leads to rapid wearing of the tools and can cause injurries to the user. Never exceed the maximum pressures listed in the owner’s manuals, since that it leads to rapid wearing of the tools and can cause injurries to the user.
Tork Air Tools Operating Instruction - 7 : Never use incorrectly specified accessories or accessories not deasigned for use with pneumatic tools. Never use incorrectly specified accessories or accessories not deasigned for use with pneumatic tools.
Tork Air Tools Operating Instruction - 8 : Use recommended guards and ensure that they are mounted securely and not dammaged. Use recommended guards and ensure that they are mounted securely and not dammaged.
Tork Air Tools Operating Instruction - 9 : Ensure accessories are the correct fit for the tools and application. Ensure accessories are the correct fit for the tools and application.
Tork Air Tools Operating Instruction - 10 : Strong vibrations may lead to feelings of numbness. Avoid long exposores to strong vibrations to avoid injurries or equivalent Strong vibrations may lead to feelings of numbness. Avoid long exposores to strong vibrations to avoid injurries or equivalent
Tork Air Tools Operating Instruction - 11 : Beware of run-on. Do not touch working end of tool until it is turned-off and stopped completely. Beware of run-on. Do not touch working end of tool until it is turned-off and stopped completely.
MAINTENANCE:
Tork Air Tools Maintenence - 1 : Use dry, clean air. Drain daily and instal filter at or near the take-off popint to prevent trouble from foreign matters. Use dry, clean air. Drain daily and instal filter at or near the take-off popint to prevent trouble from foreign matters.
Use air hose (shorter the better), joints and other fittings of good condition and of proper size to avoid pressure drop.
Tork Air Tools Maintenence - 2 : Atleast every three months, regular or practical overhalls by a competent person is needed for best performance. Atleast every three months, regular or practical overhalls by a competent person is needed for best performance.
Tork Air Tools Maintenence - 3 : Use only “Tork” genuine parts for replacement. Use only “Tork” genuine parts for replacement.
Apply recommended oil before and after operations ( for example SHELL TURBINE OIL #32, MOBILE TURBINE OIL #32)
Tork Air Tools Maintenence - 4 : Apply recommended high quality grease ( for example SHELL ALVANIA #2, SHELL ALVANIAEP, MOBILEPLEX 2, MOBILPLEX 47 or equivalent ) to bearings once every three months or when tool is overhauled. Over greasing will cause dull motion or overheating. Apply recommended high quality grease ( for example SHELL ALVANIA #2, SHELL ALVANIAEP, MOBILEPLEX 2, MOBILPLEX 47 or equivalent ) to bearings once every three months or when tool is overhauled. Over greasing will cause dull motion or overheating.